the fuel minder store

Your # 1 Source for remote fuel-level indicators and accessories!

installation instructions

Waterminder Collection


contact us


Order Now

aquatel m107-BT
Wireless Level Controller

Aquatel's M107-BT Wireless Pump Control system with a remote level monitor is a very effective wireless system to automatically or manually control fluid levels in just about any shape or size tank/cistern up to 1,000 feet away. The maximum distance can be doubled to 2,000 feet using the AQ930 Omni Booster Antenna or up to 6 miles away using the AQ920 Yagi Booster Antenna kit (both ends). See bottom of this page for antenna details and options.


  • Can be used to switch a pump, a solenoid or any other device
  • Unit can be setup to fill tank from a well, or drain the tank (for septic and transfer applications)
  • 3' power leads with plug and socket for quick and easy installation
  • Has low battery warnings, displays temperature of units and even a rapid water loss alarm
  • Displays indoor and outdoor air temperature
  • Full function irrigation pump timer (for single zone system controlled by the pump)
  • Set tank/cistern depth via display Unit
  • Blue backlit LCD display
  • Long range antennas available to extend range up to 6 miles (see links at the bottom of this page)
  • Suitable for tanks from 1 metre (3.28 feet) to 4 metres (13.12 feet) in depth

The Display Unit setup menu is so easy to navigate that within minutes you will be able to set high and low level alarms, filling or draining fluid level, pump cut-in and cut-off points, set irrigation timer and manually switch on or off your pump/valve. Once levels have been set, the M107-BT will automatically monitor and maintain those fluid levels, so you can relax. Or when in Timer Mode, switch on and off your irrigation pump at the set times/days while at the same time monitor the supply tank to ensure your irrigation pump never runs dry.


  • Residential well water systems with water storage tank
  • Pump fill or empty control
  • Rainwater collection system
  • Livestock watering system with automatic fill control
  • Pond top-off system
  • Automatic water level controller
  • Wireless level controller

aquatel m107


M107 Wireless Display Unit

m107 display unit


M107 Wireless Level Control Unit

m107 control unit


M107 Wireless Tank Unit


Aquatel AQ930 Omni Booster Antenna
aq930 booster antenna

Omnidirectional booster antenna doubles the effective range of the Aquatel M107, units up to 2000 feet. This antenna gives up to 3 dBi gain and when used at both ends will double your Aquatel's standard radio range, allowing up to 600m (2000 feet) line of sight. The AQ930 Omni Booster Antenna is tuned to AquaTel's frequency hopping bands, designed for use within the USA, Australia & New Zealand. Should you require longer radio range, the directional Yagi Booster Antenna Kits will give you up to 10km (6 miles) line of sight range.

Installation is easy: Simply unscrew the standard antenna and replace with the Omni Booster Antenna.


Aquatel AQ920 Yagi Booster Antenna

Omnidirectional booster antenna increases the effective range of the Aquatel M107, D110 and T110 units up to 6 miles if used at both ends.

ygi antenna

The Yagi Booster Antenna gives up to 10.0 dBi gain and should always be mounted on a mast or roof at least 1.5m (5 feet) above the ground. This antenna will increase your effective range up to 10km (6 miles) if used at both ends. The AQ920 Yagi Booster Antenna is tuned to Aquatel's frequency hopping bands, designed for use within the USA, Australia & New Zealand.

AQ920 Kit Includes:

  • Custom made 7 element Yagi antenna
  • 12 foot coaxial cable with RP-SMA connector
  • Mounting bracket
  • 2 U-clamps for mast or pole mounting
  • Fits a 2 1/4" Pole (Not Included)

How It Works:

The Tank Unit is mounted on the top surface of the tank and uses ultrasonic signals to detect the fluid level inside. Acquired data is then wirelessly transmitted through the Control Unit and onto the Display Unit. The Display Unit displays the fluid level and system status on the LCD screen. The Display Unit is also used for setting the system settings such as level thresholds. Commands are then sent back to the Control Unit to switch the pump or valve on and off depending on the tank level.


See the Aquatel M107 Brochure


See the Aquatel M107 Applications Drawings


See the Aquatel M107 Manual


See the Wireless Antenna Installation Guide



purchasing information